JVC SP-UXGN9V

51
Listening to sounds using Bluetooth
®
technology
■ When a Bluetooth USB adaptor is con-
nected
1 Press [Bluetooth SETTING] repeat-
edly while holding down [SHIFT] to
select “DEL DV” in the display
window.
2 Press [ENTER/SET].
• The name of the Bluetooth device currently
connected appears in the display window.
3 Press  or  repeatedly to select
the desired Bluetooth device.
4 Press [ENTER/SET].
■ When a Bluetooth USB adaptor is con-
nected
1 Press [Bluetooth SETTING] repeat-
edly while holding down [SHIFT] to
select “SND QLTY” in the display
window.
2 Press [ENTER/SET].
3 Press  or  repeatedly.
• Each time you press  or , the setting tog-
gles between “HIGH” and “NORMAL” in the
display window.
• Select “HIGH” for a better sound.
• Select “NORMAL” if the Bluetooth connec-
tion is unstable.
4 Press [ENTER/SET].
■ When a Bluetooth device is connected
1 Press [Bluetooth SETTING] repeat-
edly while holding down [SHIFT] to
select “SYS INFO” in the display
window.
2 Press [ENTER/SET].
3 Press  or  repeatedly.
• Each time you press  or , the setting tog-
gles between the name and address of this
system.
• To return to the normal display, press
[ENTER/SET].
Deleting a paired Bluetooth device
Change the quality of sound to/from
the Bluetooth device
Confirming the information on this
system
Listening to sounds using Bluetooth
®
technology (continued)
For the locations of the remote
control buttons, refer to page 46.
UX-GN9V[A]-09.fm Page 51 Monday, February 23, 2009 9:46 AM