Masterpage:Right+
EN 73
Filename [SR-MV40U_11Subsidiary.fm]
Page 73 March 13, 2006 11:41 am
SUBSIDIARY SETTINGS
8 S-VHS MODE — ON / OFF
Your unit can record in S-VHS (Super VHS), S-VHS ET or VHS.
To record in S-VHS:
Set “S-VHS MODE” to “ON”. Then, insert a cassette marked
“S-VHS”. The S-VHS indicator lights up on the front display panel.
The S-VHS recording mode is selected.
To record in S-VHS ET on a VHS cassette:
Set “S-VHS ET” to “ON”. (墌 pg. 71) Then, insert a cassette
marked “VHS”. The S-VHS indicator lights up on the front display
panel.
To record in VHS:
Insert a cassette marked “VHS”.
Set “S-VHS ET” to “OFF”. (墌 pg. 71)
The VHS recording mode is automatically selected regardless of
the “S-VHS MODE” setting.
To record in VHS on an S-VHS cassette:
Insert a cassette marked “S-VHS”. The S-VHS indicator lights up
on the front display panel. Then, set “S-VHS MODE” to “OFF”. The
S-VHS indicator goes off.
The VHS recording mode is selected.
NOTE:
When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights up on the front display panel
regardless of the “S-VHS MODE” setting.
8 RETURN POINT — TAPE END / REC END
Returning point for Playback or Repeat Play can be set to tape end
or recording end. (This unit considers 1-second unrecorded portion
as the recording end.) When the returning point is reached,
playback stops and the cassette will be automatically rewound.
TAPE END: Playback stops at the end of tape.
REC END: Playback stops at the end of the recording.
NOTE:
The setting you have made is kept in memory. Even if this unit is
unplugged or power failure occurs, it will resume every time you turn on
this unit. (墌 pg. 77)
8 REC SAFETY — ON / OFF
Usually, you can only record onto a cassette with its record safety
tab intact. When this function is set to “OFF”, recording can be
done onto a cassette with its record safety tab removed.
NOTES:
● The setting you have made is kept in memory. Even if this unit is
unplugged or power failure occurs, it will resume every time you turn
on this unit. (墌 pg. 77)
● When “REC SAFETY” is set to “OFF”, playback does not start
automatically when you insert a cassette with its record safety tab
removed. (墌 pg. 46)
SR-MV40US.book Page 73 Monday, March 13, 2006 11:41 AM
To Next Page
Loading...
Need help?
General
