JVC TD-WS305TN A User Manual

TD-W304BK/-W305TNaacreciu
«| Power
Switch
' TD-W305
R. Mode’} only
Switch |
oll
Volume
i
Dd)
_| TD-W305
J only
Headphone
Jack
= Volume assembly
1) Remove the volume knob while pulling it.
2).
Remove
two
screws(7)
retaining
the
board
ass’y.
How
to
engage
the lock arm spring Mechanism
'
s
Ass'y
=
FL
indicator
assembly
_
1)
Pull
F.
card
cable
from
the
main
board
for
disconnec-
tion.
2)
Remove
two
screws(8)
retaining
the
FL
holder.
= Power switch assembly
1) Remove two screws (9) retaining the switch.
2) Switch knob can be removed by pulling the switch ass’y.
Engage with
; door hook,
= Reverse mode switch assembly (TD-W305/TD-W304 only)
1)
Remove
two
screws
@
and
(2)
retaining
the
reverse
mode
switch
ass’y.
™ Headphones jack assembly (TD-W205/TD-W204)
1)
Remove
the
front
panel
ass’y.
ineare
tip:
Hk
2)
Remove
a
screw
@
retaining
the
jack
ass’y.
the
hole
of
ene
M.
holder.
=
Dolby
NR
switch
assembly
Fig.
1-6
1) Remove the deck A anddeck B.
2)
Remove
two
screws
retaining
the
eject
holder
assy.
Remove
before
replacing
mechanism
button
or
operation
switch.
3) Remove a screw retaining the switch board.
® Mechanism operation switch board assembly
1) Remove the front panel ass’y.
2) Remove the mechanism ass’y.
3) Detach the mechanism bracket from the cassette holder,
and remove the cassette holder from the front panel
ass’y. ’
. 4) Remove six screws @ retaining the switch board.
= 6Main board assembly
1) Remove four screws retaining pin jack, heat sink
and synchro jack from the rear side. ;
2) Disconnect power connector CN901.
3) Remove four screws 45) retaining the main board ass’y.
Draw the board ass’y slightly to the front side and raise
it by the rear side. ~ -
(No: 4325-1) 3

JVC TD-WS305TN A Specifications

General

Brand	JVC
Model	TD-WS305TN A
Category	Cassette Player
Language	English