JVC TH-A25 Instructions

34
English
Tuning in Stations
From the remote control:
1 Press FM/AM repeatedly to select the
band.
The last received station of the selected band is tuned
in.
• Each time you press the button, the band alternates between
FM and AM.
2 Press and hold TUNING UP or
DOWN.
• TUNING UP: Increases the frequency.
• TUNING DOWN: Decreases the frequency.
The system starts searching for stations and stops when a station
of sufficient signal strength is tuned in.
• When you press the button repeatedly, the frequency changes
step by step.
On the front panel:
1 Press SOURCE repeatedly until the
desired band (FM or AM) appears on the
display.
The last received station of the selected band is tuned in.
• Each time you press the button, the source changes as follows:
2 Press 7 so that “MANUAL” appears on
the display.
• Each time you press the button, the operation mode of
¢ and 4 buttons alternates between “PRESET” and
“MANUAL.”
PRESET: Select this for using ¢ and 4 as the
buttons to select the preset station.
MANUAL: Select this for using ¢ and 4 as the
buttons to change the frequency manually.
3 Press and hold ¢ or 4.
• ¢: Increases the frequency.
• 4: Decreases the frequency.
The system starts searching for stations and stops when a station
of sufficient signal strength is tuned in.
• When you press the button repeatedly, the frequency changes
step by step.
Notes:
• When a station of sufficient signal strength is tuned in, the
indicator lights up on the display.
• When an FM stereo program is received, the indicator also
lights up.
Tuner Operations
For basic tuner operations, see “Basic Tuner Operations” on page
15.
FM/AM
DOWN - TUNING - UP
SOURCE
DVD/CD DIGITAL IN
FMAM
AUX
AUDIOTV
SLEEPDIMMER
DVD FM/AM
TV CH
AUX
TV/VIDEO
MUTING
CONTROL TEST TONE
TOP
MENU
MENU
CHOICE/TIME
AUDIO
SLOW RETURN PL
SUBTITLE ANGLE ZOOM
ON SCREEN
TV VOL
AUDIO VOL
1234
5678
9
TV
0
MEMORY CANCEL
ENTER
SOUND
/
REPEAT
FM MODE
STEP
DOWN - TUNING - UP
PROGRESSIVE
RM-STHA25U
DVD CINEMA SYSTEM
NTSC/PAL
FM/AM
¢/4
TUNING
UP/DOWN
FM MODE
MEMORY
Setting the AM Tuner Interval Spacing
Some countries space AM stations 9 kHz apart, and other countries
use 10 kHz spacing. Select the appropriate interval spacing setting
to receive the AM broadcasting in your area.
• 9 kHz interval spacing is the initial setting.
• Each time you do the following procedure, the AM tuner interval
spacing alternates between 9 kHz and 10 kHz.
From the remote control ONLY:
1 Select AM as the band.
2 Press the number buttons in the following order:
9, 1, then 0.
The new setting for the interval spacing appears on the display.
• Each time you press the three number buttons (9, 1, and 0),
the AM tuner interval changes as follows.
AM–10K: Select this to set 10 kHz interval spacing.
AM–9K: Select this to set 9 kHz interval spacing.
AM–10K
(10 kHz)
AM–9K
(9 kHz)
Number
buttons
34_35_TH_A25[UG].p65 03.9.11, 3:45 PM34

JVC TH-A25 Specifications

General

Brand	JVC
Model	TH-A25
Category	Home Theater System
Language	English