To Next PageTo Next PageHow to adjust picture to fit TV screen on JVC TH-S33 Home Theater System?
If the picture doesn't fit the TV screen on your JVC Home Theater System, the monitor type may not be set correctly. Set “MONITOR TYPE” properly.
Why JVC Home Theater System remote control not working?
If the remote control of your JVC Home Theater System isn't working, it might be due to exhausted batteries. Try replacing them. Also, ensure that direct sunlight isn't falling on the remote sensor, as this can interfere with its operation. Hide the remote sensor from direct sunlight.
What to do if there is no sound from JVC TH-S33?
If you're not getting any sound from your JVC Home Theater System, the speaker cord might not be properly connected. Check the connection. Also, make sure that you have selected the correct source.
How to fix JVC Home Theater System when power does not come on?
If your JVC Home Theater System isn't powering on, the power cord might not be correctly connected. Ensure the power cord is properly connected.
What to do if no picture is displayed on TV screen from JVC TH-S33 Home Theater System?
If no picture is displayed on the TV screen when using your JVC Home Theater System, check that the video cable is correctly connected. Also, verify that the disc you are using is playable.
Why are the video and audio distorted on my JVC Home Theater System?
Distorted video and audio on your JVC Home Theater System can be caused by a scratched or dirty disc. Try replacing or cleaning the disc. Also, if a VCR is connected between the center unit and the TV, connect the center unit and TV directly.
What to do if JVC TH-S33 remote control does not work as expected?
If your JVC Home Theater System's remote control isn't working as expected, the remote control mode may not be set for the desired source. Before operation, press one of the source selecting buttons for the desired source.
Why JVC TH-S33 Home Theater System picture is blurred or divided?
If no picture is displayed, the picture is blurred, or the picture is divided into two parts when using your JVC Home Theater System, the scan mode may be set to “NTSC PRG” or “PAL PRG” though the center unit is connected to the TV which does not support the progressive video input. Change the scan mode to “PAL” or “NTSC.”
How to reduce noise when listening to broadcast on JVC TH-S33?
If it's hard to listen to broadcast because of noise on your JVC Home Theater System, it might be due to disconnected antennas. Reconnect the antennas correctly and securely.
General| Type | Home Theater System |
|---|---|
| Total Power Output | 300W |
| DVD Player | Yes |
| HDMI Inputs | 1 |
| USB Port | Yes |
| Bluetooth | Yes |
| Supported Media | DVD, CD, USB |
| Audio formats | MP3, WMA, AAC |
| Subwoofer | Yes |
| FM Radio | Yes |
| Remote Control | Yes |
| Video formats | MPEG4 |
| Connectivity | HDMI, USB |
| System Type | Home Theater |
| Speaker Configuration | 5.1 Channel |
