JVC TM-22EG User Manual

POWER SUPPLY
Using an AC outlet
Plug the provided power cord into an AC
outlet,
The monitor cannot be powered from the
battery pack if the power cord is plugged
into the monitor. Make sure the power cord
is disconnected from the monitor before the
battery pack is used.
Wall outlet
Installing the exclusive NB-P1 battery pack:
1. Lift up the battery compartment cover
by putting your finger into the slot of
the battery compartment cover.
2. Insert a battery pack into the compart-
ment. When it is fully inserted, it locks
in automatically and electrical connec-
tion is made.
3. To remove the battery pack, pull up the
battery eject knob which is located
under the battery pack insertion slot.
lf the BATT ALARM indicator should light
red after installing the battery pack, recharge
the battery pack or replace it with a fully
charged one.

JVC TM-22EG Specifications

General

Brand	JVC
Model	TM-22EG
Category	Monitor
Language	English