JVC UN-AD8

14
Changing the Display Brightness
You can dim the display window.
*
“AUTO DIM” does not work for CD/MP3/WMA/DVD-VR.
Changing the Picture Tone
• While showing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own taste.
To select a preset picture tone
1 While playing, display VFP setting screen.
2 Select a preset picture tone.
To erase the screen, press VFP again while holding SHIFT,
or wait for more than 5 seconds.
To adjust the picture tone
1 Select “USER1” or “USER2.”
• Follow steps
1 and 2 explained on the left column.
2 Select a parameter you want to adjust.
3 Adjust the parameter.
4 Repeat steps 2 to 3 to adjust other parameters.
To erase the screen, press VFP again while holding SHIFT,
or wait for more than 5 seconds.
DIMMER ON Dims the display.
AUTO DIM* Erases the display illumination when
disc playback starts.
The display illuminates when playback
stops.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings.
Remote
ONLY
7
DIMMER
DIMMER ON
AUTO DIM
DIMMER OFF
(While holding...)
(Canceled)
Remote
ONLY
ON SCREEN
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
VFP
(While holding...)
On the TV
NORMAL CINEMA
USER2 USER1
GAMMA Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS Adjust if the entire picture is bright
or dark (–8 to +8).
CONTRAST Adjust if the far and near positions
are unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
ENTER
TV CH
TV CH
ENTER
TV CH
TV CH
UX-AD8[A].book Page 14 Tuesday, November 22, 2005 1:59 PM