JVC UN-AD8

28
Advanced Tape Operations
Recording on a Tape
You can use type I tapes for recording.
• To play a tape, see page 9.
1 Insert a recordable cassette.
2 Check the tape running direction and Reverse Mode
settings on the display.
To change the direction
To change the Reverse mode if necessary
AUX
REC
DVD/CD 3
TAPE 2 3
FM/AM
7
PUSH OPEN 0
Remote control
Main unit
SHIFT
REV. MODE
TAPE 2 3
7
DVD/CD 3
FM/AM/
AUX
IMPORTANT
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
()
To record on both sides.
•
When using Reverse Mode, start
recording in the forward (
3) direction.
To record on only one side.
INFO
With the tape side facing outside
Push Insert
Close
Tape direction indicator
Reverse mode indicator
Current source
3 (forward)
2 (reverse)
REV. MODE
FM/PLAY MODE
(While holding...)
UX-AD8[A].book Page 28 Tuesday, November 22, 2005 1:59 PM