33
AUDIO menu
Item Contents
DIGITAL AUDIO OUTPUT Set this item correctly when using the DVD OPTICAL DIGITAL OUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built-
in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
DOWN MIX This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM
ONLY.”
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, TV, etc.
D.RANGE COMPRESSION Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.
AUTO: You can enjoy powerful playback sound.
ON: Select this if the sound level of DVD Video is lower than the one of TV program to make the
sound at a lower volume clear.
OTHERS menu
Item Contents
RESUME You can select the Resume.
ON: The System resumes playback from the position where playback has been stopped if the disc is
still in the disc trays.
OFF: Resume is deactivated.
ON SCREEN GUIDE Activate (ON) or deactivate (OFF) the on-screen guide.
DivX REGISTRATION The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a disc in which the Registration Code recorded, the System’s Registration
Code is overwritten for copyright protection.
UX-AD8[A].book Page 33 Tuesday, November 22, 2005 1:59 PM
To Next Page
Loading...
Need help?
General
