JVC UX-A3 User Manual

UX-A3 B/E/G/GI/EN
Timer/Clock section
Ori Cc (SLEEP)
a mr
| ae HL Li
TREBLE COPUNINGTIMER SLEEP
VOLU
See AGINE
'YPER — BASS.
@ Display window @ ENTER button
@) Timer mode indicator Register the time or timer setting.
@) SLEEP indicator @ DISPLAY/CLOCK button
@) Timer indicator (ON/OFF) Set the time and current time displays.
® Time display @ SLEEP button
@ TIMER buttons (UP/DOWN)
Set the time or timer setting.
@® TIMER button
Set the timer setting or timer ON/OFF (to reset or
cancel the timer).
REMOTE CONTROL UNIT
Preparation before use
e Installing batteries in the remote control unit
1. Remove the battery cover from the back of the remote
control unit.
2. Insert two "R03" size batteries.
e Insert the batteries with the (+) and (—-) terminals
matching the indication inside the battery compartment.
3. Replace the cover.
® Battery replacement
When the remote control operation becomes unstable
or the distance from which remote control is possible
becomes shorter, replace the batteries with new ones.
Using the remote control unit
To use the remote control unit, point it at the REMOTE
SENSOR and press the buttons gently and firmly. Remote
control operation is possible within about 7 m (approx. 23
ft). However, since the remote control range is less when
the unit is used at an angle, use directly in front of the
REMOTE SENSOR, as far much possible.
Do not expose the REMOTE SENSOR to strong light (direct
sunlight or artificial lighting) and make sure that there are
no obstacles between the REMOTE SENSOR and the
remote control unit.
8 (No. 1850)

JVC UX-A3 Specifications

General

Brand	JVC
Model	UX-A3
Category	Stereo System
Language	English