14
Changing the Display Brightness
You can dim the display window and illumination lamps.
While the System is turned on...
While the System is turned off (on standby)...
Adjusting the Audio Input Level
If the sound from the component connected to the
AUX jack is too loud or is too small when changing from
another source to “AUX,” you can change the audio input
level through the AUX jack (without changing the volume
level).
While the “AUX” is selected as a source...
DIMMER 1 Dims the display and illumination lights
around the CD #/8, MEMORY #/8
and USB #/8.
DIMMER 2 Dims the display more than DIMMER 1
and turns off the illumination lights
around the CD #/8, MEMORY #/8
and USB #/8.
DISPLAY ON Turns on the clock indication on the
display.
DISPLAY OFF Turns off the clock indication on the
display.
Remote
ONLY
DIMMER 2DIMMER 1
DIMMER OFF
(Canceled)
DISPLAY ON
DISPLAY OFF
LEVEL 1 Select this if the sound on “LEVEL 2” is too
loud. This setting is recommended when
connecting any audio device other than a
portable audio device to the AUX jack.
LEVEL 2 Select this if the sound on “LEVEL 3” is too
loud.
LEVEL 3 Select this when listening to a portable audio
device (initial setting).
Remote
ONLY
LEVEL 1 LEVEL 2
LEVEL 3
3 sec.
UX-DM9[B].book Page 14 Friday, July 20, 2007 2:18 PM
To Next Page
Loading...
Need help?
General
