20
Changing the Display Mode
While listening to a DAB service...
*
1
Non DAB signal.
*
2
See page 15.
Searching for a Service by PTY Codes
You can locate a particular kind of program from among all
the services you can receive by specifying a PTY code.
• For details about PTY codes, see page 17.
1 While listening to an DAB service...
2 Select a PTY code.
3 Start searching.
The System searches all the available ensembles, and
switches to a program of the selected PTY code when
found.
• If no program is found, “NOT FOUND” appears on the
display.
• To stop searching, press PTY SEARCH or CANCEL.
To continue searching after it stops on an unwanted
service
Press PTY SEARCH again.
Switching Temporarily to a Service of
Your Choice Automatically
PTY Standby Reception function allows the System to
temporarily switch to a DAB service broadcasting a program
of your choice (TA, News, or Info).
• This function works while listening to a service providing
the required signals.
While listening to a DAB service, select the program
type.
Service
label
“NO SIGNAL” will appear if no signal is
sent.
PTY The broadcast program type is displayed.
“NO PTY” will appear if no signal is sent.
DLS Dynamic Label Segment (text messages
the station sends) is displayed. “NO
TEXT” will appear if no signal is sent.
INFO
Remote
ONLY
PTY
DLS
MEM REMAIN
*
2
USB REMAIN
*
2
Service label
Frequency
Ensemble ID
Clock*
1
Remote
ONLY
Ex. When “News” is selected
TA Traffic announcement in your area.
News News.
Info Program the purpose of which is to impart
advice in the widest sense.
Remote
ONLY
TA News
Info
OFF
(Canceled)
UX-DM9[B].book Page 20 Friday, July 20, 2007 2:18 PM
To Next Page
Loading...
Need help?
General
