15
Setting the Clock
Without setting the built-in clock, you cannot use Recording
or Playback Timer (see pages 40 and 42).
• To exit from setting the clock, press CLOCK/TIMER as
required.
• To correct a mis-entry during the process, press CANCEL.
You will return to the previous step.
1 Activate the clock setting mode.
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected (see page 40).
2 Set the time and day.
• Adjust the hour, then the minute, then the day of the
week.
Now the built-in clock starts working.
To check the current clock time during play
*
1
For FM Radio Data System stations, see page 16. For
DAB services, see page 20.
*
2
Only while playing back an
MP3/WMA/WAV track
.
*
3
Only while playing back the built-in memory or USB
device.
*
4
Not displayed while “MEMORY” is selected as a source.
*
5
Not displayed while “iPod” or “USB” is selected as a
source or while USB device is not detected.
Turning Off the Power Automatically
Auto Standby
This function is available only for CD, built-in memory,
USB, iPod and AUX.
When Auto Standby is in use, the A.STBY indicator lights
on the display.
When the playback stops, the A.STBY indicator starts
flashing. If no operation is performed while the indicator is
flashing (for about 3 minutes), the System turns off
(standby) automatically.
Sleep Timer
You can set the shut-off time so that you can go to bed
without turning off the System yourself.
1 Specify the time (in minutes).
2 Wait until the set time disappears.
To check the time remaining until the shut-off time, press
SLEEP.
• If you press the button repeatedly, you can change the shut-
off time.
Remote
ONLY
INFO
Source
information
*
1
Track title*
2
Group title*
3
MEM REMAIN*
4
(MEMORY Remaining Time)
USB REMAIN*
5
(USB Remaining Time)
Clock
Remote
ONLY
SET
CANCEL
(Canceled)
10 20 30 60 90 120 150
180
Canceled
UX-DM9[B].book Page 15 Friday, July 20, 2007 2:18 PM
To Next Page
Loading...
Need help?
General
