36
Forming a Group (FORM GR)
You can make groups in the built-in memory.
• You can create an empty group using this function. An
empty group can be used for recording or editing. After
recording or moving tracks into an empty group, you can
select that group to play back.
• You can make up to 999 groups in the built-in memory or
USB device. When you record a 1000th group, “GROUP
FULL” appears on the display and no group will be made.
Example: Making 2nd group.
1 Start and stop playback of the built-in memory.
2 Select “FORM GR.”
3 Make a new group.
4 Enter a title of the new group.
• See “Entering Titles” on page 35.
5 Store the title.
“EDITING” appears on the display. The message goes off as
the group is stored.
Moving a Track (MOVE)
You can move a track to another group in the built-in
memory.
Example: Moving the track “B” in the 1st group to the 2nd
group.
1 Start playing back a track you want to move in the
built-in memory.
2 Select “MOVE.”
Remote
ONLY
Group 1
Group 1 Group 2
TITLE FORM GR
ERASE
MOVE
FORMAT
TITLE FORM GR
ERASE GR
FORMAT
Canceled
or
Canceled
To go back to
previous step:
To quit editing:
or
Remote
ONLY
Group 1
Group 1 Group 2
Group 2
TITLE FORM GR
ERASE
MOVE
FORMAT
Canceled
Continued on the next page
UX-DM9[B].book Page 36 Friday, July 20, 2007 2:18 PM
To Next Page
Loading...
Need help?
General
