22
To program the playing order of tracks on the
built-in memory and USB device
You can arrange the playing order of the tracks in the
built-in memory and USB device (up to 999) before you start
playback.
1 Start and stop playback.
•
When programming the tracks on the USB device
•
When programming the tracks on the built-in
memory
2 Select the desired track.
• You can also use the number buttons to select the track.
3 Program the desired track.
• If you try to add a track after registering 999 tracks,
“PROGRAM FULL” appears on the display and the
track will not be programmed.
4 Repeat the steps 2 and 3 above.
5 Activate Program Play.
6 Start playback.
To check the programmed contents
Before or after playback...
To modify the program
Before or after playback...
To exit from Program Play
Before or after playback...
* Appears only when “MEMORY” or “USB” is selected as
a source.
Program number
PROGRAM RANDOM
GROUP
RANDOM
GROUP
Canceled
Number of the programmed tracks
Group number of the
track last programmed
Track number of the track
last programmed
Playback starts in the order
you have programmed.
To skip: To pause: To stop:
To release, press again.
To erase the last track: To erase the entire
program:
Built-in
memory
USB
device
For built-in
memory
For USB
device
In the programmed order.
In the reverse order.
2 sec.
PROGRAM RANDOM
GROUP
RANDOM*
GROUP*
Canceled
UX-DM9[B].book Page 22 Friday, July 20, 2007 2:18 PM
To Next Page
Loading...
