15
Advanced Playback Operations
Programming the Playing Order—
Program Play
You can arrange the playing order of the tracks (up to 32)
before you start playback.
• You can repeat the programmed tracks by pressing REPEAT/
RANDOM during Program Play (see page 17).
1 Select the source, then stop playback.
2 Activate Program Play.
3 Enter the track (group/track) for Program Play.
For audio CD
• To select tracks, you can also use 4/x .
Remote control
Main unit
CD 6
Number
buttons
REPEAT/
RANDOM
STOP 7
PROGRAM
USB MEMORY
6
CD 6
DISPLAY/
PROGRAM
STOP 7
USB
MEMORY
6
GROUP 5/K
TUNING/
GROUP
4/x
4
/x
or
MP3
PROGRAM
CD
PROGRAM
For audio CD
For MP3/WMA disc and USB mass
storage class device
(Ex. MP3/WMA disc)
• When the USB mass storage class device is played back,
the USB indicator lights (see page 5).
• To enter group/track
number 5, press 5.
• To enter group/track
number 20, press 10 → 2
→ 0 (when “-- --” appears),
or press 10 → 0 → 2 → 0
(when “-- -- --” appears).
• To enter group/track
number 305, press 10 →
3 → 0 → 5.
=
>
=
>
=
>
CD
PROGRAM
Track number
Program step
UX-G250D[B].book Page 15 Friday, June 6, 2008 10:02 PM
To Next Page
Loading...
Need help?
General
