(No.MB408)1-13
3.1.8 Removing the AC board
(See Fig.15)
• Remove the metal cover, rear cover and cassette chassis as-
sembly.
(1) From the back side of the main body, remove the two
screws J.
(2) From the left side of the main body, remove the screw K
and screw M attaching the AC board.
(3) Disconnect the connector CN902
on the AC board toward
this side.
(4) From the forward side of the AC board, remove the tie band
fixing the power cord and disconnect the power cord from
the connector CN901
on the AC board.
Reference:
After connecting the power cord to the connector CN901
,
fix it with a new tie band as before.
(5) Disconnect the wires from the connectors (CN903
, CN904)
on the AC board.
Reference:
After connecting the wire to the connector CN904
, fix it
with the wire holder as before.
(6) Take out the AC board from the main body.
Reference:
When attaching the AC board, insert the edge of the AC
board in the slot f of the rear panel as before.
Fig.15
AC board
CN903
CN904
CN902
K
M
Rear panel
AC board
f
Wire holder
CN904
Tie band
AC board
CN901
Power cord
J
To Next Page
Loading...
