BEFOREUSINGFORTHEFIRSTTIME
_ Connecting to other
Installing the unit equipments
Best location
Select a locationwhich is level,dry and neither too cold nor too hot
(temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty
locations or any location subjectto vibration,
If Interference occurs
if this unit is placed near a tuner or a radio receiver tuned to AM
frequencies, interference mayoccur. Ifthis happens, we recommend
either that you move this unit as far away as possible from the tuner or
receiver or briefly turn off the power to this unit.
Connecting to an amplifier or receiver allows you to listen to the sound
from the speakers.
Connect the OUTPUT jacks of this unit to the line input jacks of an
amplifier or receiver with the supplied audio cord.
Notes
• Never connect the OUTPUT jacks to the PHONO jacks of the
amplifier or receiver, This may cause damage to the components.
• Makesurethstthesemechannelsereconnectedbetweenthisunit
and the amplifier or receiver: LEFT to LEFT and RIGHT to RIGHT.
• Do not connect the power plug untilall connections are complete.
• Connect the plugs firmly. Loose connections may cause noise or
malfunction.
Rear panelof this unit
' Audiocord
Amplff'mrorreceiver
Speakerunit
To Next Page
Loading...
Need help?
General
