Jydepejsen Softline - Cubic Series Assembly; Model-Specific Assembly Steps

1
Back side of stove
Back side of stove
21
Cubic series - assembly
Cubic Wall :
The stove must be prepared for either top or rear outlet. Standard construction is rear outlet.
Fasten the furnishing on the wall. Place the stove on the lower hooks on the furnishing, tip up
the stove and fasten it.
Cubic Corner :
The stove must be prepared for either top- or rear outlet. Standard construction is rear outlet.
Fasten the furnishing on the wall. Place the stove on the lower hooks on the furnishing, tip up
the stove and fasten it.