23
2) Machine will now be programmed to
descale and will dispense cold water.
3) Press the rinse/milk button, to dis-
pense the solution.
4) After solution is dispensed, wait 30
seconds.
Repeat steps 3 and 4 until the water tank
is empty.
Note: Both buttons will continue to flash
throughout the process.
6
Once completed, please empty, rinse
out and clean the water tank and the
collecting container.
7
Reinsert the water filter if applicable.
Fill the water tank with fresh water and
replace it in the appliance.
8
Rinse the appliance with fresh wa-
ter by pressing the rinse/milk button as
often as required until the water tank is
empty. Refill this with fresh water, emp-
ty and clean the collecting container and
replace the drip tray under the spout
9
To conclude you will have to exit the
descaling program. To do this, press the
rinse/milk button and the "Large cup"
button simultaneously for at least 3 se-
conds
again. The appliance will finally
switch off.
WARNING
If you descale the appliance
only a short time after prepa-
ring a drink, the discharged descaling
liquid can be very hot at the beginning -
scalding hazard.
min.
3 s.
5
8
7
To Next Page
Loading...
