K-FEE ONE - Page 15

15
English
6
Empty the heat-safe cup afterwards.
The appliance is ready for use.
5
Press the milk button to activate the
rinsing process. The milk button will blink
during the rinsing process, and all the
button symbols will illuminate when it is
complete.
NOTE:
On this appliance, the milk
button is also used to activate
the rinsing process. You should repeat
the complete rinsing process 4 times
before using the appliance for the fi rst
time. To do this, press the milk button
again after each rinsing process.
INFO:
The rinse button will illu-
minate after the appliance
has heated up each time you start
the appliance up from cold. Please
rinse once.
The brewer is immediately ready for use
once it has been heated up to brewing
temperature when started up from hot.
WARNING: Very hot water –
scalding hazard.
4b
5
6
K-FEE_359_BDA_US_KV_RZ_20210111.indd 15K-FEE_359_BDA_US_KV_RZ_20210111.indd 15 11.01.2021 15:58:5611.01.2021 15:58:56