K-FEE ONE - Frequently asked questions; Troubleshooting Button Errors; Beverage Preparation Problems

32
All function buttons fl ashing rapidly?
The appliance could be overheated. Turn o and unplug the appliance, then allow it to
cool down. Once cooled, plug the appliance back in and switch it on. If the error occurs
again, please contact our service center.
Beverage is not being prepared properly?
Check to ensure that the lever has been pressed down completely. If, despite this, the
error occurs again you should clean the appliance (see instructions p. 26 - 27: Cleaning
with cleaning fl uid) and also descale it (see instructions p. 28 - 29).
Beverage dispensing is delayed?
The appliance is heating up.
Liquid capacity during beverage preparation is insuffi cient?
The system could be calcifi ed. Descale the appliance in accordance with the in-
structions on p. 28 - 29. If the problem continues to occur, please check the pour
size setting you have programmed. If required, reset the appliance to the factory
settings (see instructions p. 21) and then reprogram your individually required pour
size setting (see instructions p. 20).
Beverage is not hot enough?
The heating element could be calcifi ed. Descale the appliance in accordance with the
instructions on p. 28 - 29. If the problem continues to occur, please contact our service
center.
CAUTION:
The appliance only functions correctly with pods
labeled with the K-fee® – your system logo.
Use of other pods can result in the following risks:
health risks, damage to the appliance and possible loss
of warranty claims.
The appliance only functions correctly with pods
logo.
Use of other pods can result in the following risks:
health risks, damage to the appliance and possible loss
Frequently asked questions
K-FEE_359_BDA_US_KV_RZ_20210111.indd 32K-FEE_359_BDA_US_KV_RZ_20210111.indd 32 11.01.2021 15:59:1711.01.2021 15:59:17