29
English
5
In o /standby mode, press the milk
button and the brewed buttons simul-
taneously for at least 3 seconds (this pla-
ces the machine programming into the
descaling mode and will function in cold
water). Once in descaling mode, press the
milk button at intervals of 30 seconds as
often as required until the water tank is
empty.
6
After this, please empty, rinse out and
clean the water tank and the cup.
7
Reinsert the water fi lter (optional) if
applicable. Fill the water tank with fresh
water and replace it in the appliance.
8
Rinse the appliance with fresh water
by pressing the milk button as often as re-
quired until the water tank is empty. Refi ll
this with fresh water, empty and clean the
heat-safe cup and replace the drip tray
under the spout
9
To conclude you will have to exit the
descaling program. To do this, press
the milk button and the brewed button
simultaneously for at least 3 seconds
again. The appliance will fi nally switch o .
WARNING:
If you descale the appliance
only a short time after prepa-
ring a beverage, the discharged des-
caling liquid can be very hot at the
beginning - scalding hazard.
7
min.
3 sec.
5
8
K-FEE_359_BDA_US_KV_RZ_20210111.indd 29K-FEE_359_BDA_US_KV_RZ_20210111.indd 29 11.01.2021 15:59:1411.01.2021 15:59:14
To Next Page
Loading...
