1
INTRODUCTION
The X-10™ uses sophisticated computer security and makes dialing much easier than that
of traditional combination locks. The microprocessor in the lock recognizes a number as part
of a combination when you change dialing direction. (See the section on Dialing the X-10.)
Note: The lock is shipped preset to operate in the Single Combination Mode with a
Default Factory Combination of 50-25-50.
The 8-digit lock serial number is located on a removable sticker on the lock case (See Figure
1.) Which is designed for the security professional in charge of this lock to peel off and
place on the proper form. Since you may need the serial number of the lock to reset it if the
combination is lost or forgotten and the door is open, it is important that you keep a record
of the lock serial number in a secure place.
Figure 1 - Serial Number Label
Serial Number
Sticker
To Next Page
