Need help?Do you have a question about the Kaba B-eco and is the answer not in the manual?
General| Brand | Kaba |
|---|---|
| Model | B-eco |
| Category | Touch terminals |
| Language | English |
Manual's scope, manufacturing date, serial number, and software versions.
Identifies target audience for the manual, including specialists and specific roles.
Specifies the intended purpose of the device and consequences of misuse.
Details requirements for qualified personnel and environmental conditions for installation.
Outlines who is authorized for maintenance and reconstruction of the device.
Provides cautions and safe handling procedures for lithium batteries in the device.
Details measures to prevent damage to electronic components from electrostatic discharge.
Guidelines for proper disposal of the device and its components, and recycling.
Describes the Kaba B-eco terminal, its functions, and features.
Details the terminal's system, interfaces, readers, power, environment, and dimensions.
Lists the standards and EU directives the device complies with.
Describes the location and information found on the device's identification plate.
Explains the main components: terminal housing, mounting plate, and optional sealing.
Covers communication principles, parameterization, user rights, terminal data, and operating modes.
Details hardware variants (keypads, readers) and optional features like ingress protection and UPS.
Describes software variants, options (memory, encryption, I/O), and the license file.
Covers general installation requirements, site selection, clearances, and connections.
Specifies requirements for Ethernet and signal lines, including wire sizes.
Provides instructions and dimensions for securely mounting the terminal's plate to a wall.
Step-by-step guide for inserting batteries into devices equipped with a UPS.
Illustrates terminal block connections for Ethernet, relay output, and digital inputs.
Details the procedure for securing the terminal housing onto the mounting plate.
Instructions for mounting IP54 devices, including cable insertion and sealing.
Explains the function and operation of the terminal's rear service switch for special modes.
Describes the process and effects of performing a cold start, including data deletion and reset.
Explains how to enter service mode for setup, maintenance, and device diagnosis.
Details how to enter service mode and simultaneously set a static IP address for the terminal.
Explains how to perform a normal system start (warm start) of the terminal software.
Covers network prerequisites, including free UDP/HTTP ports and firewall configuration.
Details the step-by-step procedure for automatic terminal setup using 1-click installation.
Outlines options for manually configuring device settings, such as network addresses or hardware extensions.
Provides examples for Ethernet settings, host interface configurations (UDP/XML), and reader settings.
Instructions on how to adjust the display contrast using the keypad and default password.
Identifies and describes the various operating elements on the terminal's front panel.
Explains the nature of the keypad keys and how to operate them using fingertip touch.
Instructions for holding contactless media near the RFID reader for entry.
Instructions for swiping badges through the reading bar for magnetic stripe or barcode entry.
Illustrates typical operating sequences, states, and user interactions like booking.
Details how to perform numeric and alphanumeric input using the keypad and special keys.
Outlines the process and functions for enrolling and managing fingerprints directly on the device.
Explains the purpose and recommended replacement interval of the CR2032 buffer battery.
Details the procedure, frequency, and specifications for replacing UPS batteries.
Provides instructions for cleaning the terminal housing and reader window safely and effectively.
Guidelines for packaging complete devices for shipping and return to ensure protection.
Specifies requirements for packaging ESD-sensitive electronic assemblies for transport and warranty.
Information required for correct labeling of return packages for fast processing and customs.
To Next Page
