Manual Installation
B-eco 04043988 - 02/2014 35
5.3 Attach mounting plate
75,5
109
2
3
1
Fastening the mounting plate, dimensions in mm
The mounting plate (2) is mounted directly to the wall using screws (1) / dowels (3).
There are three oval fastening holes for fastening the mounting plate.
Fixing material (included in the delivery):
• 3 round-head wooden screws DIN 96 Ø 4.5 x 35 (1)
• 3 dowels S6 (3)
When mounted on different surfaces, use suitable fastening material.
In case of soft mounting surfaces, make sure that the housing is not pressed into the
surface when mounting it.
The unevenness of the mounting surface may not exceed 0.5 mm. Use washers, for
example, to compensate a possible unevenness.
To Next Page
Loading...
