Design and Function Manual
22 04043988 - 02/2014 B-eco
4 Design and Function
4.1 Device structure
1
2
The device consists of the terminal housing (1) and the mounting plate (2).
The mounting plate is the wall-mounting element of the device. The terminal
housing is simply snapped into the mounting plate and secured by means of a screw
from below.
The installation lines are led into the device from below. The connections are located
on the rear of the terminal.
3
RFID devices with optional IP54 ingress protection are equipped by an additional
sealing (3).
To Next Page
Loading...
