Kaba B-eco - Installation lines

Installation Manual
34 04043988 - 02/2014 B-eco
5.2 Installation lines
5.2.1 Ethernet
Network cable with RJ45 connector, line requirement CAT.5 E or higher.
5.2.2 Inputs - Outputs
The terminals for the signal lines are designed for the following max. wire sizes:
Diameter: 0.3-1.4 mm
Cross section: 0.08-1 mm
2
AWG number: 28 - 16
Recommended cable:
CAT.5 S-UTP 4 x 2 AWG 24 or AWG 22 (according to EIA/TIA568) or higher.