LOCK RESPONSES
• Each keystroke generates a green flash
G
with a beep 8.
• The completion of a step within an operation is indicated by a green flash
G
with a
beep
8.
• The successful completion of an operation is indicated by a green/red flash with a
beep
G
R
8.
• An error is indicated by three red flashes with beeps.
R
8
R
8
R
8
• A low battery is indicated by continuous alternating green and red flashes with
beeps
(
G
8
R
8
G
8
R
8 ... ) after a lock opening.
• Bolt end pressure is indicated by a maximum of twelve red flashes
R
followed by a
green/red flash with a beep
G
R
8 after a correct opening combination has been
entered. If the bolt end pressure is relieved before all twelve red flashes are displayed,
the red flashes will terminate and a green flash with a beep
G
8 will occur
indicating that the lock can now be opened.
• If an attempt is made to initiate an operation that begins with a # on a Model TLC lock
during Time Delay, you will get an error indicator of three red flashes with beeps
R
8
R
8
R
8 after the first two keystrokesof the operation.
TO UNLOCK
1. • For Single Mode
EE
EE
E (Factory combination is “50 25 50”.)
Enter Manager User (User 1) or User 2 combination.
G
88
88
8
• For Dual Custody Mode
EE
EE
E
EE
EE
E
Enter User 1 or User 2 combination.
88
88
8
Enter the second combination.
G
88
88
8
Wrong Try Penalty: 5 wrong tries =
3 min. lockout
Each additional wrong try = 3 min. lockout
Red flashes with beeps
R
88
88
8 will occur during the lockout.
2. Immediately rotate the container handle to retract bolt works before a green/
red flash with beep
G
R
88
88
8 occurs (4 second opening window). Open the
container door. To close and lock the container, close the door and rotate the
container handle back to locked position.