ARROW Double cylinder deadlocks
8400-xx-1299-92 factory combinated
8
400-xx-1099 uncombinated and use*
3400-xx-1299-92 factory combinated
3400-xx-1099 uncombinated and use*
*3450-00-2002 long double cylinder lost motion tailpiece
standard for 1
3
/4" doors
*3450-80-2004 timing washer
*3450-00-2001 short double cylinder lost motion tailpiece
included for 1
3
/8" doors
Section 2 - 9
Product Information
CAL-ROYAL CGN grade 1 levers and SL grade 2 levers
8400-xx-1299-18 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-18 factory combinated
3400-xx-1099 uncombinated and use*
*1590-80-2000 SD/3A tailpiece, vertical
*3450-80-2003 spacing washer
CAL-ROYAL BA grade 2 knobs
8400-xx-1299-14 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-14 factory combinated
3400-xx-1099 uncombinated and use*
*4700-80-2001 SA/3B tailpiece, horizontal
*3450-80-2003 spacing washer
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
CAL-ROYAL LSD single cylinder deadlocks
LSDD double cylinder deadlocks
8400-xx-1295-01 factory combinated and use*
8400-xx-1095 uncombinated and use*
3400-xx-1295-01 factory combinated and use*
3400-xx-1095 uncombinated and use*
*Cal-Royal tailpieces
Cal-Royal tailpieces are not supplied.
CORBIN CK4200 grade 1 knobs, UT5200 Unit locks
RUSSWIN 8400-xx-1204-04 factory combinated
8400-xx-1004 uncombinated
3400-xx-1204-04 factory combinated
3400-xx-1004 uncombinated
Contact Kaba about applications prior to 1972.
SD/3A
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
large diameter
plug requires
J or K series
bottom pins
“95” plug & shell
with
small plug face
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
SA/3B
Key-In-Knob Cylinders
NOTE: File shutter tab slightly on Inside
cylinder housing to allow clearance for
b
ottom peak.
NOTE: Sometimes the drivehole will
not accept the Peaks
®
tailpiece without
first filing it narrower top to bottom.
To Next Page
Loading...
