Section 2 - 10
Product Information
CORBIN CL3300 grade 1 levers
RUSSWIN 8400-xx-1299-20 factory combinated
8
400-xx-1099 uncombinated and use*
3400-xx-1299-20 factory combinated
3400-xx-1099 uncombinated and use*
*4700-80-2001 SA/3B tailpiece, vertical
*3450-80-2003 spacing washer or, the original
*Corbin Russwin tailpiece may be used.
CORBIN CL3400, CL3600 grade 1 levers,
RUSSWIN Lever trim A5, N5 for ED8000 exit devices
8400-xx-1299-11 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-11 factory combinated
3400-xx-1099 uncombinated and use*
*4700-80-2002 S/3C tailpiece, vertical
*3450-80-2003 spacing washer
S/3C
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
CORBIN CL3800 grade 2 levers
RUSSWIN 8400-xx-1299-01 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-01 factory combinated
3400-xx-1099 uncombinated and use*
*the original Corbin Russwin tailpiece and plastic
tailpiece bushing
Corbin Russwin tailpiece and bushing not supplied.
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
CORBIN CL3900 grade 2 levers
RUSSWIN 8400-xx-1255-55 factory combinated
8400-xx-1055 uncombinated
3400-xx-1255-55 factory combinated
3400-xx-1055 uncombinated
FALCON B Series grade 2 levers
8400-xx-1299-18 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-18 factory combinated
3400-xx-1099 uncombinated and use*
*1590-80-2000 SD/3A tailpiece, vertical
*3450-80-2003 spacing washer
SD/3A
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
S
A/3B
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
Key-In-Knob Cylinders
NOTE: Not for use on G3 exit trim.
If spacer supplied by Corbin Russwin is
missing, substitute Kaba 3400-00-2009
security bushing.
To Next Page
Loading...
