Section 2 - 1
Product Information
FALCON LY grade 1 levers (same as early model imported PDQ lever)
8400-xx-1299-23 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-23 factory combinated
3400-xx-1099 uncombinated and use*
*4700-80-2001 SA/3B tailpiece, vertical
*3450-80-2003 spacing washer
*two 4700-00-4007 metal washers, tailpiece
Section 2 - 11
FALCON D Series deadlocks
8400-xx-1295-01 factory combinated
8
400-xx-1095 uncombinated and use*
3400-xx-1295-01 factory combinated
3400-xx-1095 uncombinated and use*
Single cylinder functions:
*Falcon TP-10 tailpiece (A28350-000-00)
and retainer TPR-4 (A08385-000-00)
or
Double cylinder functions:
*Falcon TP-9 tailpiece (A24350-007-00)
and retainer TPR-2 (A14351-000-00)
Use Falcon tailpiece, not supplied.
FALCON RU Series grade 1 Unit lock
8400-xx-1299-01 factory combinated
8400-xx-1099 uncombinated*
3400-xx-1299-01 factory combinated
3400-xx-1099 uncombinated*
*Use Falcon parts
*Install Falcon driver and tailpiece.
FALCON F Series levers & N Series knobs
8400-xx-1299-17 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-17 factory combinated
3400-xx-1099 uncombinated and use*
*1590-80-2000 SD/3A tailpiece, horizontal
*3450-80-2003 spacing washer
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
SA/3B
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
large diameter
plug requires
J or K series
bottom pins
“95” plug & shell
with
small plug face
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
Key-In-Knob Cylinders
SD/3A
Most functions use Falcon no. 030730-001-30
RU 381 inside cylinder only use Falcon no. 030730-003-30
RU571 only use Falcon no. 030730-005-30
Falcon parts are not supplied.
To Next Page
Loading...
