Section 2 - 18
Product Information
SARGENT 464, 484 double cylinder deadlocks
8400-xx-1299-92 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-92 factory combinated
3
400-xx-1099 uncombinated and use*
*3450-00-2002 long double cylinder lost motion tailpiece
standard for 1
3
/4" thick doors
*3450-80-2004 timing washer
*3450-00-2001 short double cylinder lost motion
tailpiece included for 1
3
/8" thick doors
SARGENT 7600 Series Integralock
8400-xx-1276-76 factory combinated
8400-xx-1076 uncombinated
3400-xx-1276-76 factory combinated
3400-xx-1076 uncombinated
SCHLAGE A Series, grade 2 non-Orbit knobs
8400-xx-1299-14 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-14 factory combinated
3400-xx-1099 uncombinated and use*
*4700-80-2001 SA/3B tailpiece, horizontal
*3450-80-2003 spacing washer
SCHLAGE A Series, grade 2 Orbit knob
8400-xx-1299-07 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-07 factory combinated
3400-xx-1099 uncombinated and use*
*4700-80-2002 S/3C tailpiece, horizontal
*3450-80-2003 spacing washer
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
SA/3B
S/3C
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
small diameter
plug face required
Key-In-Knob Cylinders
NOTE: Slightly file shutter tab on
inside cylinder housing to allow
clearance for bottom peak.
SCHLAGE AL Series grade 2 levers
8400-xx-1299-20 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-20 factory combinated
3400-xx-1099 uncombinated and use*
*4700-80-2001 SA/3B tailpiece, vertical
*3450-80-2003 spacing washer
SA/3B
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
To Next Page
Loading...
