Kaba Peaks Preferred

Section 2 - 21
Product Information
ULTRA 7000 Ball knob
8400-xx-1299-18 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-18 factory combinated
3400-xx-1099 uncombinated and use*
*1590-80-2000 SD/3A tailpiece, vertical
*3450-80-2003 spacing washer
TRILOGY 2500 bypass, lever designs prior to 5-97
8400-xx-1299-18 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-18 factory combinated
3
400-xx-1099 uncombinated and use*
*1590-80-2000 SD/3A tailpiece, vertical
*3450-80-2003 spacing washer
S
D/3A
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
SD/3A
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
WEISER D 9370 and 9470 series deadlocks
8400-xx-1295-01 factory combinated
8400-xx-1095 uncombinated and use*
3400-xx-1295-01 factory combinated
3400-xx-1095 uncombinated and use*
*Weiser tailpiece and retainer.
Weiser parts are not supplied.
VON DUPRIN 22 Series exit device knob trim
8400-xx-1299-07 factory combinated
8400-xx-1099 uncombinated and use*
3400-xx-1299-07 factory combinated
3400-xx-1099 uncombinated and use*
*4700-80-2002 S/3C tailpiece, horizontal
*3450-80-2003 spacing washer over tailpiece
large diameter
plug requires
J or K series
bottom pins
“95” plug & shell
with
small plug face
S/3C
“99” plug & shell
large diameter
plug requires
J or K series
bottom pins
Key-In-Knob Cylinders