Kaba Peaks Preferred

Section 2 - 22
Product Information
YALE 5300L grade 2 levers
8400-xx-1295-95 factory combinated then modify
8400-xx-1095 uncombinated and use*
3400-xx-1295-95 factory combinated then modify
3400-xx-1095 uncombinated and use*
*4700-80-2001 SA/3B tailpiece, vertical
*3450-80-2003 spacing washer
Field modification required.
YALE 5400 grade 1 knobs and 5300 grade 2 knobs
Retrofit for Yale No. 1801 cylinder
8400-xx-1254-54 factory combinated
8400-xx-1054 uncombinated
3400-xx-1254-54 factory combinated
3400-xx-1054 uncombinated
Same as 8400-xx-1055-55 cylinder below, but without tailpiece.
YALE 5400LN grade 1 levers
8400-xx-1255-55 factory combinated
8400-xx-1055 uncombinated and use*
3400-xx-1255-55 factory combinated
3400-xx-1055 uncombinated and use*
*3425-82-3012 tailpiece
*3425-00-4012 retainer pin (
1
/1
6
" roll pin)
Same as 8400-xx-1054 cylinder above but with tailpiece.
YALE 5300LN grade 2 levers
8400-xx-1295-56 factory combinated
8400-xx-1095 uncombinated and use*
3400-xx-1295-56 factory combinated
3400-xx-1095 uncombinated and use*
*3450-80-2003 spacing washer
*3450-00-2000 lost motion tailpiece, vertical
large diameter
plug requires
J or K series
bottom pins
“95” plug & shell
with
small plug face
large diameter
plug requires
J or K series
bottom pins
“95” plug & shell
with
small plug face
cut line
SA/3B
YALE 6100 and 6200 series Monolocks
Retrofit for Yale No. 1801 cylinder
8400-xx-1255 (Yale monolock) factory combinated
8
400-xx-1055 (Yale monolock) uncombinated
3400-xx-1255 (Yale monolock) factory combinated
3400-xx-1055 (Yale monolock) uncombinated
Same as 8400-xx-1054-54 cylinder below, but without rollpin and spacer.
Key-In-Knob Cylinders
Note: Modify tailpiece using Yale tail-
piece as a template.