1. “L” adapter 2. shorten adapter* 3. notch for key tip
and retainer ring
*Dealers have reported that shortening isn’t always necessary.
American padlocks
Use 8400-xx-1006 or
3400-xx-1006 cylinder.
Shorten Medeco adapter .050"
Lori adapter may also be modified.
Section 2 - 23
Product Information
Kaba 1411 or New Standard
8400-xx-1299-41 factory combinated
8400-xx-1099 cylinder with Kaba P tailpiece
3400-xx-1299-41 factory combinated
3400-xx-1099 cylinder with Kaba P tailpiece
The following can be made from 8400-xx-1099 or 3400-xx-1099 cylinder
kit using OEM drivers:
Master ProSeries—Use adapter #0298-0628 from Master.
8400-xx-1299-01 factory combinated
3400-xx-1299-01 factory combinated
Schlage PL series—Use padlock driver from Schlage.
8400-xx-1299-01 factory combinated
3400-xx-1299-01 factory combinated
Schlage old style 45-101—Use padlock driver from Schlage.
8400-xx-1299-01 factory combinated
3400-xx-1299-01 factory combinated
The following can be made from 8400-xx-1006 or 3400-xx-1006 cylinder
kit using OEM adapters:
Master System 29—Use with adapter from Master
8400-xx-1206-01 factory combinated
3400-xx-1206-01 factory combinated
Master Pro Series—Use adapter #0298-0626 from Master.
8400-xx-1206-01 factory combinated
3400-xx-1206-01 factory combinated
American 3600 & 3700—Use with modified adapter. See below.
8400-xx-1206-01 factory combinated
3400-xx-1206-01 factory combinated
6-pin 140
M
ade with the “99”
Made with the “06”
Padlocks—Key-in-Knob Cylinders
To Next Page
Loading...
