Kaba Peaks Preferred

Div. of Assa Abloy
“SARGENT” appears on the latch face.
Latch face bears a number indicating product line (6, 7, 8, 9, 10, etc.).
Sargent 10 Line is identical to Arrow lever, except for small plug face diameter.
T
OOLS:
7, 8 and 9 Line grade 1 knobs require a
3
/32" hand held punch and mallet.
10 Line grade 1 levers require Sargent bushing wrench, #10-0022.
Section 5 - 8
Cylinder Installation Guide
Sargent
Sargent 6 line 6 Line 7, 8, 9 Line 10 Line 5500
grade 2 grade 2 grade 1 grade 1 grade 2
non-Ball knobs Ball knobs knobs levers knobs
retrofit type KDH KDH Non-KDH KDH KDH
Peaks Preferred 8400-xx-1095 8400-xx-1095 8400-xx-1008 8400-xx-1095 8400-xx-1095
Peaks Classic 3400-xx-1095 3400-xx-1095 3400-xx-1008 3400-xx-1095 3400-xx-1095
Sargent 6500 Line 2000 7600 Line tubular
grade 2 levers exit devices preassembled deadlocks
retrofit type KDH KDH Non-KDH
Peaks Preferred 8400-xx-1095 8400-xx-1095 8400-xx-1076 8400-xx-1099
Peaks Classic 3400-xx-1095 3400-xx-1095 3400-xx-1076 3400-xx-1099