PK3166_09-07 • RAC 3.5 / RAC 4 / RAC 4XT INSERT READER INSTALLATION GUIDE
2
1.0 • Introduction and Disclaimers
This document outlines the Installation Steps for the Insert
Reader (Item Number R71-432) for the RAC3.5, RAC 4
and RAC 4XT and should be used in conjunction with their
respective Installation Guide.
Target Audience
Please read and follow all directions carefully. These
instructions are designed for use by maintenance professionals
or lock installers who are familiar with common safety practices
and competent to perform the steps described. Kaba Lodging
Systems is not responsible for damage or malfunction due to
incorrect installation.
Technical Assistance
For technical assistance call
1-800-906-4526, 1-514-340-9025
OR
Visit the Kaba Support Website:
http://connect.kabalodging.com
Warnings and Cautions
Important: Carefully inspect panel to ensure that the
recommended procedures will not cause damage.
Kaba’s standard warranty does not cover damages
caused by installation.
!
Caution: Wear safety glasses when tools are required for
mounting panel reader
!
Please read and follow all directions
carefully.
!
This installation to be made on a metal panel only. The
panel thickness must be in the range of 1/16" (1.59mm)
to 1/4" (6.35mm)
!
To Next Page
Loading...
