2.5 External Wireless access point examples
2.5.1 Enable WEP/WPA security on an external wireless access point
Note : All devices will need to support the selected Encryption Protocol.
Figure 64 Select WEP Security on external access point
2.5.2 Enable a DHCP Server function
Figure 65 Enabling DHCP on External Access Point
Note : If you don’t mind having to check what IP (internet protocol) address is allocated to the iPA, you could stop
conguring DHCP here . This conguration will allocate an address from a pool, this shows a pool of 64 addresses with
192.168.11.1 and 192.168.11.2 already used by the access point and the DHCP server. Some Access points may give you
the option to allocate a xed IP address . As shown in
WEP Selected
DHCP Selected
83
© 2017 Innite Electronics, Inc., All Rights Reserved.