To Next PageTo Next Page
Need help?Do you have a question about the KAESER SK 19 and is the answer not in the manual?
General| Model | SK 19 |
|---|---|
| Type | Rotary Screw Compressor |
| Motor Power | 11 kW |
| Voltage | 400 V |
| Frequency | 50 Hz |
Information on main voltage, current, frequency, fuses, and cable size.
List of recommended KAESER lubricants with change intervals.
Explanation of safety symbols, attention symbols, and warning labels.
Rules for safe operation, electrical work, and modifications.
Guidelines for power supply installation and protection by qualified personnel.
Explanation of the dual control mode: full-load, idle, and standstill.
Description of running, idle/standstill periods and switching cycles.
Requirements for level surface, ambient temperature, and ventilation clearances.
Instructions for connecting the discharge outlet to the system pipework.
Details on power supply wiring, fusing, and cable selection.
Checks for shipping damage, functional components, and observation during first hours.
Safety warnings, power failure behavior, and operational precautions.
Comprehensive checklist for installation and readiness before initial start.
Procedure to verify correct motor and airend rotation direction.
Instructions for adjusting motor overload relay set points and changing jumpers.
Measures to take before initial start, including oil introduction and idle run.
Instructions for starting and stopping the compressor using the control keys.
Procedure for acknowledging alarms and preparing for restart.
Safety rules for personnel and equipment during maintenance.
Scheduled maintenance tasks based on operating hours or time intervals.
Guidelines for changing oil in the separator tank and oil cooler.
Procedure for replacing the oil separator cartridge and associated parts.
