Need help?Do you have a question about the KAESER SM 10 and is the answer not in the manual?
General| Brand | KAESER |
|---|---|
| Model | SM 10 |
| Category | Air Compressor |
| Language | English |
Specifies the required volume of cooling oil for the machine and heat recovery options.
Covers compressor motor specifications, power ratings, and enclosure protection.
Details rated power and enclosure protection for the compressor motor.
Outlines basic requirements and standards for electrical power supply.
Provides detailed specifications for electrical connections and supply types.
Defines the qualifications required for authorized operators and maintenance personnel.
Describes various potential dangers during machine operation.
Details how to safely handle and mitigate various sources of danger.
Provides guidance for safe handling of the machine during its lifecycle.
Illustrates and explains the meaning of safety signs on the machine.
Lists the safety devices provided and prohibits modification.
Details the different operating states and control strategies of the machine.
Explains the STOP, READY, LOAD, and IDLE operational states.
Describes DUAL, QUADRO, VARIO, and MODULATING control modes for energy efficiency.
Provides an overview of the control panel's keys and indicators.
Specifies requirements for the installation environment.
Steps for connecting the machine to the compressed air system.
Detailed guide on connecting the machine to the electrical power supply.
Steps for adapting the machine to different main voltage supplies.
Guidelines for pre-commissioning checks and re-commissioning after storage.
Step-by-step guide for the initial startup of the compressor.
Verifying the function of the safety interlock switch for doors and panels.
Standard procedures for turning the machine on and off.
Steps to safely power on the compressor unit.
Safe procedure for powering down the compressor.
How to use the emergency stop and restart the machine safely.
Procedures for acknowledging and clearing operational alarms and warnings.
A table listing common faults, their causes, and remedies.
Critical safety precautions before performing any maintenance tasks.
Guidance on adhering to the recommended maintenance schedule.
A list of routine maintenance tasks and their frequencies.
How to test the functionality of the emergency stop button.
Complete guide for draining and replacing the cooling oil.
Instructions for replacing the oil filter.
Steps for replacing the oil separator cartridge.
To Next Page