De-commissioning, storage and disposal
Improper handling of old operating fluids and components represent a danger for the environment.
➤ Drain off fluids and dispose of them according to environmental regulations.
These include, for example, compressor oil and cooling water.
➤ Have refrigerant disposed of by authorized bodies only.
➤ Dispose of the machine in accordance with local environmental regulations.
3.5.3 Organizational Measures
➤ Designate personnel and their responsibilities.
➤ Give clear instructions on reporting faults and damage to the machine.
➤ Give instructions on fire reporting and fire-fighting measures.
3.5.4 Danger Areas
The table gives information on the areas dangerous to personnel.
Only authorized personnel may enter these areas.
Activity Danger area Authorized personnel
Transport Within a 10 ft radius of the machine. Installation personnel for transport
preparation.
No personnel during transport.
Beneath the lifted machine. No personnel!
Installation Within the machine.
Within 3 ft radius of the machine and its sup‐
ply cables.
Installation personnel
Operation Within a 3 ft radius of the machine. Operating personnel
Maintenance Within the machine.
Within a 3 ft radius of the machine.
Maintenance personnel
Tab. 20 Danger Areas
3.6 Safety devices
Various safety devices ensure safe working with the machine.
➤ Do not change, bypass or disable safety devices.
➤ Regularly check safety devices for their correct function.
➤ Do not remove or obliterate labels and notices.
➤ Ensure that labels and notices are clearly legible.
Further information More information on safety devices is contained in chapter 4, section 4.3.
3 Safety and Responsibility
3.6 Safety devices
18
Operator Manual Screw Compressor
SM Tri-Voltage, SIGMA CONTROL 2 9_5875 33 USE
To Next Page
Loading...
Need help?
General
