2.3 Weight
The weight given is the maximum. Actual weights of individual machines are dependent on equip‐
ment fitted.
SM 7.5 SM 10 SM 15
Weight [lb] 441 463 485
Tab. 5 Machine weight
2.4 Temperature
SM 7.5 SM 10 SM 15
Minimum cut-in tempera‐
ture [°F]
40 40 40
Typical airend discharge
temperature during oper‐
ation [°F]
149 – 200 149 – 200 149 – 200
Maximum. airend dis‐
charge temp. (automatic
shut-down) [°F]
230 230 230
Tab. 6 Temperature
2.5 Ambient conditions
SM 7.5 SM 10 SM 15
Maximum elevation amsl
[ft]
3000 3000 3000
Permissible ambient tem‐
perature [°F]
40 – 115 40 – 115 40 – 115
Cooling air temperature
[°F]
40 – 115 40 – 115 40 – 115
Intake air temperature
[°F]
40 – 115 40 – 115 40 – 115
* Higher altitudes are permissible only after consultation with the manufacturer.
Tab. 7 Ambient conditions
2 Technical Data
2.3 Weight
9_5875 33 USE
Operator Manual Screw Compressor
SM Tri-Voltage, SIGMA CONTROL 2
5
To Next Page
Loading...
Need help?
General
