KAESER SM 10 User Manual

Fig. 22 Switching cabinet ventilation
1 Ventilation grill
2 Filter mat
1. Carefully remove the ventilation grill and take out the filter mat.
2. Beat the mat or use a vacuum cleaner to remove loose dirt. If necessary, wash with lukewarm
water and household detergent.
3. Change the filter mat if cleaning is not possible or if the change interval has expired.
4. Insert the filter mat in the frame and latch in the ventilation grill.
10.5 Cooler maintenance
Regular cleaning of the cooler ensures reliable cooling of the machine and the compressed air.
The frequency is mainly dependent on local operating conditions.
A leaking cooler results in loss of cooling oil and compressed air.
Clogged coolers are indicative of unfavorable ambient conditions. Such ambient conditions
clog the cooling air ducts in the machine's interior and the engines resulting in increased
wear and tear.
➤ Have the authorized KAESER service representative clean the cooling air ducts.
Material Brush and vacuum cleaner
Face mask (as required)
Precondition The power supply isolating device is switched off,
the device is locked off,
the absence of any voltage has been verified.
The machine has cooled down.
10 Maintenance
10.5 Cooler maintenance
9_5875 33 USE
Operator Manual Screw Compressor
SM Tri-Voltage, SIGMA CONTROL 2
59

KAESER SM 10 Specifications

General

Brand	KAESER
Model	SM 10
Category	Air Compressor
Language	English