2 Technical Data
2.1 Nameplate
The machine's nameplate provides the model designation and important technical information.
The nameplate is located on the outside of the machine:
■ above the cooler,
or
■ on the rear of the machine.
➤ Enter here the nameplate data as a reference:
Characteristic Value
Screw Compressor
Part no.
Year
Serial no.
psig
cfm
Voltage
Hz/RPM
Package FLA
Phase
HP
Wiring Diagram
FOR SERVICE, REFER TO EQUIPMENT NUMBER
Tab. 3 Nameplate
2.2 Options
The table contains a list of possible options.
➤ Enter options here as a reference.
Option Option code Available?
Modulating control C1
SIGMA CONTROL 2 C3
Adjustable machine mountings H1
Transformer power supply for refrigerated dryer T2
Refrigerated dryer T3
Prepared for heat recovery W1
Tab. 4 Options
2 Technical Data
2.1 Nameplate
4
Operator Manual Screw Compressor
SM Tri-Voltage, SIGMA CONTROL 2 9_5875 33 USE
To Next Page
Loading...
Need help?
General
