KAESER SM 10 User Manual

Fig. 20 Acknowledging messages
10 LED Warning (yellow)
11 LED Alarm (red)
12 Key «Acknowledge»
Alarm message
An alarm shuts the machine down automatically. The red alarm LED flashes.
The system displays the appropriate message.
Precondition The fault has been rectified.
➤ Acknowledge the message with the «acknowledge» key.
The Fault LED extinguishes.
The machine is again ready for operation.
If the machine was switched off with the EMERGENCY STOP button:
➤ Unlatch the EMERGENCY STOP button (turn in direction of the arrow) before acknowl‐
edging the alarm message.
Further information Please refer to the SIGMA CONTROL 2 operating manual for a list of possible fault messages dur‐
ing operation.
Warning message
If maintenance work is to be carried out or if a warning is displayed before an alarm, the yel‐
low warning LED flashes.
The system displays the appropriate message.
Precondition The danger of an alarm is passed,
maintenance has been carried out.
➤ Acknowledge the message with the «Acknowledge» key.
The warning LED extinguishes.
Further information A list of possible alarm messages occurring during operation can be found in the service manual
SIGMA CONTROL 2 .
8 Operation
8.6 Acknowledging alarm and warning messages
9_5875 33 USE
Operator Manual Screw Compressor
SM Tri-Voltage, SIGMA CONTROL 2
51

KAESER SM 10 Specifications

General

Brand	KAESER
Model	SM 10
Category	Air Compressor
Language	English