24
EN
Insert the Micro SD*
• It is recommended to use Class 6 (or higher) TF
card to shoot smooth video files. Lower class cards
may cause the video to be blurry or jerky.
• * Micro SD cards are also called TF cards.
• There is only one correct direction to insert the
Micro SD (TF) card into the slot. Do not force the
card into the card slot, as it may damage both the
camera and the card.
• It is recommended to format new cards or cards
that have been previously used in other cameras. To
format the Micro SD card:
Enter the General Settings menu by pressing the POWER
button. Then press and hold the shoot button for 3 secs to
enter the general settings. The format card option is on the
second page of this menu. Use the WiFi button to navigate
and SHOOT to select.
Note: formatting the card will permanently delete the con-
tents.
To Next Page
Loading...
