Kaiser Baas X100 - Using Your X100 Camera; Charging the battery

23
EN
Using Your X100
Camera
Preparation
Charging the battery
Before using the X100 camera for the first time you
should fully charge the battery.
Procedure:
1. Connect X100 camera to a computer (or other USB
power source) using the USB cable (provided)
2. A: If the Camera is on when charging, 3 red lights
will blink until the battery is fully charged.
B: Only one red light will blink if the camera is o
when charging.
3. A completely flat battery will take about 5 hours to
be fully charged. The red indicator lights will turn o
when the battery is fully charged.