Kaiweets HT208A - Page 21

Resistance measurement Q
1. Turn the rotary function switch to §7t for resistance measurement. It displays “MQ"
on screen.
2. Turn off the circuit under test.
3. Plug the black test lead into the COM socket and the red test lead into the INPUT
socket.
4. Then place the test probes in contact with the points at which the resistance must be
measured.
5. Read the result on the display.
Note: When measuring resistance on a circuit, the
measured value can be influenced by other circuits.
Overload protection: 250V Black
Tt [roc| Qen > >4t
17