4. Mounting and installation
4.4 Connecting gas regulation unit
On delivery the gas regulation unit is on the
left side of the Fairo. The technical box with
the gas regulator should be placed, seen from
the left side of the Fairo, within a range of
1.5m (4m with flexible gas pipe), behind the
supplied hatch.
1. Disconnect technical box with the gas
regulator and place it, preferably, in
one of the side walls of the surround.
Always connect an approved, operable
gas tap; space has been reserved for
the gas tap in the technical box with
the gas regulator. Remove the receiver
in order to easily turn the gas tap in
the gas regulator. The connection is
1/2" female thread.
2. Place the technical box with the gas
regulator, seen from the left side of
the Fairo, within a range of 1.5m. In
order to work within a range of 4m,
the Fairo will be delivered with 4m
flexible gas pipe. With the 1.5 metre
version, 4m of cabling is always
delivered; this must not be shortened.
To Next Page
Loading...